Deploy Windows 11 using SCCM / MEMCM

Deploy Windows 11 using SCCM / MEMCM

Home windows 11 has been launched by Microsoft on October fifth, 2021. In case you are planning to deploy and handle Home windows 11 utilizing SCCM or Configuration Supervisor, this put up has you coated. Like another Home windows model, you want to do a few duties earlier than you are able to do an SCCM Home windows 11 Deployment.

In a earlier weblog put up, we listed all the pieces you want to find out about SCCM and Home windows 11. You may learn the entire put up however right here’s the vital half: SCCM is able to help Home windows 11 beginning with SCCM model 2107. It’s essential to run a minimum of SCCM 2107 and your system wants particular necessities. Let’s get began to Deploy Home windows 11 utilizing SCCM / MEMCM !

Desk of Content material

Prerequisite SCCM Home windows 11 Deployment

Earlier than the SCCM Home windows 11 Deployment, we’ll be sure that all our instruments are up to date :

SCCM Model

You want a minimum of SCCM 2107 with a purpose to help it as a Home windows 11 consumer. See the next help matrix in case you’re operating an outdated SCCM model and ensure to replace your web site.

Home windows ADK

Earlier than capturing and deploying a Home windows 11 picture, just be sure you’re operating a supported model of the Home windows ADK. Home windows recommends utilizing the Home windows ADK that matches the model of Home windows you’re deploying. If you happen to’re already operating an ADK model in your SCCM server, see our put up on learn how to set up a brand new model.

Deploy Windows 11 using SCCM / MEMCM

Home windows 11 {Hardware} Necessities

Listed here are Microsoft official necessities wanted for Home windows 11. This might be the foremost purpose in case you’ll improve your units or not.

Processor:1 gigahertz (GHz) or sooner with 2 or extra cores on a suitable 64-bit processor or System on a Chip (SoC)
RAM:4 gigabyte (GB)
Storage:64 GB or bigger storage system
System firmware:UEFI, Safe Boot succesful
TPM:Trusted Platform Module (TPM) model 2.0
Graphics card:Appropriate with DirectX 12 or later with WDDM 2.0 driver
Show:Excessive definition (720p) show that’s larger than 9” diagonally, 8 bits per colour channel

If you want to determine which machines are prepared in your group, you should use our free Home windows 11 Readiness report :

Free Readiness MEMCM / SCCM Home windows 11 Report (systemcenterdudes.com)

Obtain Home windows 11 ISO

In an effort to deploy Home windows 11 utilizing SCCM to a brand new system, we have to obtain the .ISO file. To get the ISO file, you’ll be able to both obtain it from MSDN or VLSC.

  • Within the portal, discover Home windows 11 (enterprise editions)
  • Choose the structure and language, Click on on Obtain
SCCM Windows 11 Deployment
  • Save the ISO file in your SCCM file repository

Mount and Extract Home windows 11 ISO

Earlier than you’ll be able to import the Working System into SCCM, mount and extract the Home windows 11 ISO to a folder in your SCCM File repository.

We like to avoid wasting all of the ISO content material in a single folder for the total working system (Ex: Win11-FullMedia) and extract the Set up.wim file from the Sources folder to a different listing. (Ex:Win11-Wim). You’ll perceive why later on this information.

Import SCCM Home windows 11 Working System

We are going to now import the Home windows 11 WIM file for Working System Deployment. It is best to have downloaded the ISO file in step one of this information.

We will likely be importing the default Set up.wim from the Home windows 11 media for a “vanilla” Home windows 11 deployment. You could possibly additionally import a WIM file that you just’ve created via a construct and seize course of.

This WIM file will likely be used for new computer systems, to improve an current Home windows 11, you want to import an Working System Improve Packages. We are going to cowl this within the subsequent part.

  • Open the SCCM Console
  • Go to Software program Library / Working Techniques / Working System Photos
  • Proper-click Working System Photos and choose Add Working System Picture
SCCM Windows 10 1803 Upgrade
  • On the Information Supply tab, browse to your WIM file. The trail should be in UNC format
  • Now you can choose to import solely a particular index from the WIM file. We chosen the Home windows 10 Enterprise index. ** On the time of this writing, Microsoft hasn’t renamed the Wim file
SCCM Windows 11 Deployment
  • Choose your Structure and Language and click on Subsequent
  • Within the Normal tab, enter the Title, Model and Remark, click on Subsequent
SCCM Windows 11 Deployment
  • On the Abstract tab, assessment your data and click on Subsequent
  • Full the wizard and shut this window
  • The import course of will take about 5 minutes to finish

Distribute your SCCM Home windows 11 Working System Picture

We now have to ship the Working System Picture (WIM file) to our distribution factors.

  • Proper-click your Working System Picture, choose Distribute Content material and full the Distribute Content material wizard

Add Working System Improve Packages

We are going to now import the entire Home windows 11 media in Working System Improve Packages. This bundle will likely be used to improve an current Home windows 10 system to Home windows 11 utilizing an Improve Process Sequence.

  • Open the SCCM Console
  • Go to Software program Library / Working Techniques / Working System Improve Packages
  • Proper-click Working System Improve Packages and choose Add Working System Improve Packages
SCCM Windows 10 1803 Upgrade
  • Within the Information Supply tab, browse to the trail of your full Home windows 11 media. The trail should level to an extracted supply of an ISO file. It’s essential to level on the high folder the place Setup.exe reside
  • Now you can choose to import solely a particular index from the WIM file. We chosen the Home windows 10 Enterprise index. ** On the time of this writing, Microsoft hasn’t renamed the Wim file
  • Choose your Structure and Language on the backside and click on Subsequent
SCCM Windows 11 Deployment
  • Within the Normal tab, enter the Title, Model, and Remark, click on Subsequent
SCCM Windows 11 Deployment
  • On the Abstract tab, assessment your data and click on Subsequent and full the wizard

Distribute your Working System Improve Packages

We now have to ship the Working System Improve Bundle to your distribution factors.

  • Proper-click your Working System Improve Bundle, choose Distribute Content material and full the Distribute Content material wizard
Deploy Windows 11 using SCCM / MEMCM

Create an Improve SCCM Process Sequence for current Home windows 10 Computer systems

Let’s create an SCCM activity sequence improve for a pc operating a earlier model of Home windows 10.

  • Open the SCCM Console
  • Go to Software program Library Working Techniques Process Sequences
  • Proper-click Process Sequences and choose Improve an working system from improve bundle
SCCM Windows 11 Deployment
  • Within the Process Sequence Info tab, enter a Process Sequence Title and Description
SCCM Windows 11 Deployment
  • On the Improve the Home windows Working System tab, choose your improve bundle through the use of the Browse button
  • Choose your Version Index relying on the version you wish to deploy. If you choose simply 1 index as per our indication in earlier steps, you’ll see simply 1 index to pick out from.
SCCM Windows 11 Deployment
  • On the Embody Updates tab, choose the specified Software program Replace activity
    • All Software program Updates will set up the updates no matter whether or not there’s a deadline set on the deployment (in your OSD assortment)
    • Obligatory Software program Updates will solely set up updates from deployments which have a scheduled deadline (in your OSD assortment)
    • Don’t set up any software program updates is not going to set up any software program replace in the course of the Process Sequence
SCCM Windows 11 Deployment
  • On the Set up Functions tab, choose any utility you wish to add to your improve course of
SCCM Windows 10 1803 Upgrade
  • On the Abstract tab, assessment your decisions and click on Subsequent and click on Shut

Create a Process Sequence for brand spanking new Home windows 11 Laptop

  • Nonetheless in Software program Library Working Techniques Process Sequences
  • Proper-click Process Sequences and choose Set up an current picture bundle
SCCM Windows 10 20H2
  • Within the Process Sequence Info tab, enter a Process Sequence Title, Description and choose your X64 Boot Picture
SCCM Windows 11 Deployment
  • On the Set up Home windows tab, choose your picture bundle through the use of the Browse button
  • Choose the Picture Index and enter a product key. In case you have a sound KMS server, you’ll be able to skip the product key
SCCM Windows 11 Deployment
  • Within the Configure Community tab, choose the Area and OU by which the pc account will likely be created. Additionally enter legitimate credentials to affix the area.
SCCM Windows 10 20H2
  • Within the Set up Configuration Supervisor tab, choose your Shopper Bundle
SCCM Windows 10 20H2
  • On the State Migration tab, choose if you wish to seize consumer settings and information. For our instance, we’ll flip it off
Deploy Windows 11 using SCCM / MEMCM
  • On the Embody Updates tab, choose the specified Software program Replace activity
    • All Software program Updates will set up the updates no matter whether or not there’s a deadline set on the deployment (in your OSD assortment)
    • Obligatory Software program Updates will solely set up updates from deployments which have a scheduled deadline (in your OSD assortment)
    • Don’t set up any software program updates is not going to set up any software program replace in the course of the Process Sequence
SCCM Windows 10 20H2
  • On the Set up Functions tab, choose any utility you wish to add to your improve course of
SCCM Windows 10 20H2
  • On the Abstract tab, assessment your decisions and click on Subsequent and click on Shut

Edit your Home windows 11 Process Sequences

Now that we now have created the improve and new pc activity sequences, let’s see what it seems to be like underneath the hood.

  • Open the SCCM Console
  • Go to Software program Library Working Techniques Process Sequences
  • Proper-click your improve or new pc activity sequences and choose Edit

As you’ll be able to see, it’s pretty easy. SCCM will care for all the pieces in a few steps :

SCCM Windows 11 Deployment
  • The Improve Working System step accommodates the vital step of making use of Home windows 10
  • Guarantee to decide on the correct Version

Deploy the SCCM Home windows 11 Improve Process Sequence

We at the moment are prepared for our SCCM Home windows 11 Deployment. Deploy the duty sequence to the pc we wish to improve. In our case, we’re focusing on a Home windows 10 pc that’s operating Home windows 10 21H2.

  • Go to Software program Library Working Techniques Process Sequences
  • Proper-click Process Sequences and choose Deploy
SCCM Windows 11 Deployment
  • On the Normal pane, choose your assortment. That is the gathering that can obtain the Home windows 10 improve. For testing functions, we suggest placing only one pc to start out
SCCM Windows 11 Deployment
  • On the Deployment Settings tab, choose the Goal of the deployment
    • Accessible will immediate the consumer to put in on the desired time
    • Required will drive the deployment on the deadline (see Scheduling)
  • You can’t change the Make accessible to the next drop-down since improve packages can be found to purchasers solely
SCCM Windows 10 1803 Upgrade
  • On the Scheduling tab, enter the specified accessible date and time. On the screenshot, we are able to’t create an Project schedule as a result of we choose Accessible within the earlier display screen
Deploy Windows 11 using SCCM / MEMCM
  • Within the Person Expertise pane, choose the specified choices
SCCM Windows 10 1803 Upgrade
  • Within the Alerts tab, verify Create a deployment alert when the edge is greater than the next check-box if you wish to create an alert on the failures
SCCM Windows 10 1803 Upgrade
  • On the Distribution Level pane, choose the specified Deployment choices. We are going to go away the default choices
SCCM Windows 10 1803 Upgrade
  • Assessment the chosen choices and full the wizard

Launch the Improve Course of on a Home windows 10 pc

Every thing is now able to deploy to our Home windows 10 computer systems. For our instance, we will likely be upgrading a Home windows 10 21H2 to Home windows 11.

  • Go surfing to your Home windows 10 pc and launch a Machine Coverage Retrieval & Analysis Cycle from Management Panel / Configuration Supervisor Icon
SCCM Task Sequence Upgrade
  • Open the brand new Software program Middle from the Home windows 10 Begin Menu
  • You’ll see the SCCM improve activity sequence as accessible. We might have chosen the Required possibility in our deployment schedule, to launch routinely with out consumer interplay at a particular time
  • When prepared, click on on Set up
  • On the Warning, click on Set up
SCCM Windows 10 1803 Upgrade
  • The replace is beginning, the duty sequence Set up Progress display screen reveals the completely different steps
  • The WIM is downloading on the pc and saved in C:_SMSTaskSequence
  • You may comply with activity sequence progress in C:WindowsCCMLogsSMSTSLogSMSTS.log
  • After downloading, the system will reboot
  • The pc restarted and is loading the information in preparation for the Home windows 11 improve
SCCM Windows 10 1803 Upgrade
SCCM Task Sequence Upgrade
  • The improve course of begins. This step ought to take between 60-90 minutes relying on the system {hardware}
  • Home windows 11 is preparing, 2-3 extra minutes and the improve will likely be accomplished
SCCM Windows 11 Deployment
  • As soon as accomplished the SetupComplete.cmd script runs. This step is vital to set the activity sequence service to the proper state
SCCM Task Sequence Upgrade
  • Home windows is now prepared, all software program and settings are preserved. Validate that you’re operating Home windows 11 21H2 (Construct 22000.194)
SCCM Windows 11 Deployment

Launch the SCCM Home windows 11 Deployment on a brand new Home windows 10 pc

To put in Home windows 11 on a brand new pc, the method is pretty the identical besides on how we begin the deployment.

For my take a look at, I’m booting a brand new VM. PXE boot the VM and press Enter for community boot service.

Deploy Windows 11 using SCCM / MEMCM
  • On the Welcome to activity sequence wizard display screen, enter the password and click on Subsequent
Deploy Windows 11 using SCCM / MEMCM
  • Choose your Home windows 11 Process Sequence and click on Subsequent
  • The method will begin and if all the pieces goes proper, needs to be absolutely automated.

If you happen to encounter any points, please see our troubleshooting information.

Create Home windows 11 Software program Replace Group

After your SCCM Home windows 11 Deployment makes certain that your Software program Replace Level is configured to synchronize Home windows 11 patches.

Put together your Software program replace level to incorporate Home windows 11 as a product to synchronize.

  • Adminsitration / Website / Configure Website Part (high Ribbon)
  • Choose Software program Replace Level
  • Within the Product tab, choose Home windows 11 and provoke a synchronization
Deploy Windows 11 using SCCM / MEMCM

As soon as Home windows 11 is added to your Software program Replace Level, we’ll create a Software program Replace Group that will likely be deployed to our Home windows 11 deployment assortment. This fashion, all patches launched after the Home windows 11 media creation (or your Seize date) will likely be deployed throughout the deployment course of.

To create a Home windows 11 Software program Replace Group :

  • Open the SCCM Console
  • Go to Software program Library / Software program Updates / All Software program Updates
  • On the correct aspect, click on Add Standards, choose Product, Expired and Outdated
    • Product : Home windows 11
    • Expired  : No
    • Outdated: No
    • Title accommodates 20H2
  • Choose solely the most recent Cumulative Updates that apply  (x64 or x86) and choose Create Software program Replace Group
  • As soon as created, go to Software program Library / Software program Updates / Software program Replace Teams
  • Proper-click your Home windows 11 SUG and deploy it to your OSD deployment assortment

Import ADMX File

After your SCCM Home windows 11 Deployment, If you happen to’re liable for managing group coverage in your group. Be sure that you import the most recent Home windows 11 ADMX file in your area controller.

SCCM Home windows 11 Deployment – Bonus Sources

After your SCCM Home windows 11 Improve, want a report to trace your Home windows 11 units? We developed a report that will help you obtain that. The report was constructed for Home windows 10 however it should record Home windows 11 units additionally.

Asset – Home windows 10 SCCM Report

Deploy Windows 11 using SCCM / MEMCM

We use cookies to enable site functionality and collect data about user interactions. By clicking Accept, you agree to our use for advertising, analytics, and support.